CEPHRA

Upper Lip Inclination

The lean of the upper lip, from the nose base down to its most forward point, against the photo vertical.

Drawn on a sketched reference face. Solid: measured lines · dashed: helper lines.
Formula
Angle of the line from the nose base to the upper-lip border against the vertical
Unit
Degrees (°)
Photo
Side view

How it is measured

  1. Side view: mark the nose base (subnasale) and the most forward upper-lip point (labrale superius).
  2. Draw the line from the nose base down to that lip point.
  3. Measure its angle from the downward photo vertical; forward lean is positive, backward lean negative.

Reading the value

Lower
The upper lip runs closer to vertical or leans back; negative values lean backward.
Higher
The upper lip leans further forward from the nose base.

Why it matters

It is the lip half of the nasolabial angle, shown on its own so that lip slope and nose underside tilt can be told apart. Upper-lip slope reflects the position of the upper front teeth together with lip thickness and lip tension; how closely the lip follows the teeth varies between people.

Limits

The photo vertical is the reference, so head pitch changes the value directly. Smiling, pressed lips and a moustache move the lip point; the line is a straight chord, not the lip surface tangent.

Use a level side photo with relaxed lips and a visible forehead, ear, chin and neck. Head tilt, hair, shadows or an incomplete outline can shift the lines. A measurement describes a photo, not a diagnosis, and no single value is good or bad on its own.

Research

  • A reproducible way to measure the nasolabial angle, with normal valuesAm J Orthod Dentofacial Orthop · 1992 · validation study · Moderate evidence

    The method was consistent within and between examiners. Average values were about 18° for the nose underside, 98° for the upper lip and 114° (±10°) for the nasolabial angle; women had slightly larger angles, but the difference was not significant, and the angles did not track the underlying bone measurements.

These studies describe the feature or how it is measured. They do not show that one value is better than another.

Procedures that change it

  • Lip filler+7.8° in the simulated example on the reference face
  • Lip reduction-5.5° in the simulated example on the reference face
  • LeFort I+4.5° in the simulated example on the reference face
  • Bimax+3.4° in the simulated example on the reference face
  • Trimax+3.4° in the simulated example on the reference face
  • Cheek filler-2.1° in the simulated example on the reference face

Each example uses the app’s starting strength on one reference face; on another face the same procedure moves this value by another amount.

Measure your upper lip inclination – freeMeasured in your browser. Your scans are saved on your device.