Interpupillary-to-Midface Height Ratio
The distance between the pupils compared with the vertical height from the pupils down to the upper lip.
- Formula
- Distance between the pupils ÷ height from the pupils to the upper lip
- Unit
- Ratio (×)
- Photo
- Front view
How it is measured
- Front view: measure the distance between the two iris centres.
- Measure straight down from the pupil line to the top of the upper lip, at the height of the Cupid’s bow peaks.
- Divide the pupil distance by this height; around 1, the two are about equal.
Reading the value
- Lower
- The pupil-to-lip span is tall relative to the pupil distance.
- Higher
- The pupil-to-lip span is short relative to the pupil distance.
Why it matters
The value relates how far apart the eyes are to how tall the middle of the face is. Wider-set eyes or a shorter pupil-to-lip span both give a higher, more compact reading. Nose length and upper-lip height make up most of that span.
Limits
Looking sideways moves the iris centres. Lip liner or a moustache can hide the top of the upper lip; then an estimate is used. Tilting the head up or down shortens the height in the photo and raises the value.
Use a level, directly front-facing photo with even light. Head rotation, expression, hair or shadows can hide or shift the points. A measurement describes a photo, not a diagnosis, and no single value is good or bad on its own.
Video guide
Research
- Eye spacing and eye-to-mouth distance that raters preferredVision Res · 2010 · cross-sectional study · Moderate evidence
Faces were preferred when the eye-to-mouth distance was about 36% of face length and the distance between the eyes about 46% of face width, values close to the average face.
- How much a lip lift changes the upper lip, tested step by stepAesthet Surg J · 2022 · case series · Limited evidence
A 2.5 mm excision shortened the philtrum by about 3.4 mm and a 5.0 mm excision by about 7.2 mm; the red lip came forward about 2.1 and 4.1 mm, its visible area grew about 21% and 43%, and tooth show rose about 1.9 and 4.1 mm.
These studies describe the feature or how it is measured. They do not show that one value is better than another.
Procedures that change it
- Orbital box osteotomy-0.149 in the simulated example on the reference face
- Lip lift+0.040 in the simulated example on the reference face
- Lip reduction-0.019 in the simulated example on the reference face
- Lip filler+0.019 in the simulated example on the reference face
- LeFort I+0.018 in the simulated example on the reference face
Each example uses the app’s starting strength on one reference face; on another face the same procedure moves this value by another amount.
Measure your interpupillary-to-midface height ratio – freeMeasured in your browser. Your scans are saved on your device.